null
Tensyon System
null
introduction
main_M_intro_slide001.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slide002.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slide003.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slide004.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slide005.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slide006.jpg

Tensyon

It’s an innovative supporting system for glass without drilling or cut out that can be uses with monolithic, laminated or insulating glass

Tensyon’s greatest innovation is its system of studs in composite materials, featuring top mechanical resistance and REI certified for fire resistance. This feature allows for the setting up of glass panels in direct contact, avoiding the complication of gaskets and fillers. The use of this type allows to absorb all glass movements due to the impact of wind and forces acting on the façade. In this way the function of articulated screws (rotules) that allows both axial and rotation movements it’s maintained, while eliminating the inconvenience of holes and tempering.

The result is a significant cost reduction, making point fixing facades affordable for lower budgets.

The absence of holes also eliminates one of the major limits of point-by-point support: its difficult application

in case of double-glazing, now a must given the growing focus on responsible energetic efficiency in buildings and structures.

The same problem is also eliminated in case of photovoltaic surfaces and in the integration of components within glass panes.

Through a project conceived from the start through accurate structural simulations with FEM (Finite Element Method) and clearcut requirement performance charts, we have achieved truly high resistance levels for all components. Each support can tolerate weights up to approximately 2000N with minimum deformation and the highest safety.

Such results dovetail with present-day designer trends of larger panes, in order to achieve the best possible see-through effect, while at the same time meeting contemporary requirements for a more streamlined energy performance.

Availabe versions

Tensyon represent a truly innovation in point fixing accessories not only for what we have previously decrypted but especially for the integration of a double cable clamp for the fixing of steel wires directly in its body, this features allows an easy use of this support in tension structures.

The integration of the cable clamp in the support body allows also an important reduction of the space between glass and bearing structures (about 60 mm).

Tensyon Evo is a less specialized component of the previous system: it no longer allows for the fixing of steel wires, but acquires new lightness and functionality, becoming a versatile solution for any requirement, from facades to coverings. Its «smart»

design, especially refined in its elegant and streamlined shape, makes it ideal for interiors and furnishings, as well as for exhibition booths or display needs in general.

introduction
main_M_intro_slideBis001.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis002.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis003.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis004.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis005.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis006.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideBis007.jpg

The following is a short overview of the range of applications, made possible by the “flexibility” and “modularity” that are the inspiring principles of the entire project:

  • A The component is fixed directly to the supporting structure: tubular supports, pillars, brickwork through mechanical retention
  • B The component is fixed to pre-tensed cables:
    • B1 Single large-diameter high-tension cable to resist to vertical burdens (own weight) and horizontal burdens (positive and negative drive from the wind and accidental actions).
    • B2 Vertical cable plus wind-bracing cables with rod systems
  • C The component is fixed to a glass wind-bracing structure (Glass Fins)
introduction
main_M_intro_slideTris001.jpg

Installation

  1. Fixing tensyon to structure (cables, steel tubes, glass fins etc.)
  2. Place the glass panels without gaskets
  3. Screw the fixing plate